11. Installation Instruction

11.1Select the Best Location

11.1.1Indoor Unit

šDo not install the unit in excessive oil fume area such as kitchen, workshop and etc.

šThere should not be any heat source or steam near the unit.

šThere should not be any obstacles blocking the air circulation.

šA place where air circulation in the room is good.

šA place where drainage can be easily done.

šA place where noise prevention is taken into consideration.

šDo not install the unit near the door way.

šEnsure the spaces indicated by arrows from the wall, ceiling, fence or other obstacles.

šRecommended installation height for indoor unit shall be at least 8.2 ft.

11.1.2Outdoor Unit

šIf an awning is built over the unit to prevent direct sunlight or rain, be careful that heat radiation from the condenser is not obstructed.

šThere should not be any animal or plant which could be affected by hot air discharged.

šKeep the spaces indicated by arrows from wall, ceiling, fence or other obstacles.

šDo not place any obstacles which may cause a short circuit of the discharged air.

šIf piping length is over the [piping length for additional gas], additional refrigerant should be added as shown in the table.

šRecommended installation height for outdoor unit should be above the seasonal snow level.

Example: For E9NKUAW

If the unit is installed at 32.8 ft distance, the quantity of additional refrigerant should be 1.64 oz ....

(32.8 - 24.6) ft x 0.2 oz/ft = 1.64 oz.

11.1.3Indoor/Outdoor Unit Installation Diagram

21

Page 21
Image 21
Panasonic CU-E9NKUA, CU-E12NKUA, CS-E9NKUAW Installation Instruction, Select the Best Location, Indoor Unit, Outdoor Unit

CS-E9NKUAW, CU-E9NKUA, CU-E12NKUA, CS-E12NKUAW specifications

Panasonic has established itself as a leader in the air conditioning market, offering a range of products that combine advanced technology with energy efficiency. The Panasonic models CS-E12NKUAW, CU-E12NKUA, CU-E9NKUA, CSU-2E18NBU, and CS-E9NKUAW exemplify this commitment to quality and innovation.

The CS-E12NKUAW and CS-E9NKUAW are split-type air conditioners designed for residential use. One of the standout features of these models is their energy-efficient inverter technology. This innovation allows the compressor to adjust its speed according to the cooling demand, leading to lower energy consumption and cost savings for homeowners. Additionally, these units operate quietly, ensuring a peaceful environment while effectively maintaining comfortable temperatures.

The CU-E12NKUA and CU-E9NKUA are the corresponding outdoor units that support the indoor models. These units are designed for durability and performance, using robust materials that withstand various weather conditions. Panasonic's outdoor units are equipped with a reliable cooling system that enhances the overall efficiency and longevity of the air conditioning system.

The CSU-2E18NBU model is perfect for larger spaces, handling greater loads while ensuring consistent cooling. This unit also leverages inverter technology for efficient operation. The CSU models often include advanced features such as a high-density filter that captures dust and allergens, promoting a healthier indoor environment.

All these units are designed with user-friendly interfaces, allowing for easy temperature control and adjustments. Many of the models also come with remote control options, enabling users to regulate their comfort from the convenience of their seat. Additionally, advanced air purifying technology enhances indoor air quality by eliminating harmful pollutants and odors.

Panasonic air conditioners are known for their environmentally friendly refrigerants, contributing to a reduced carbon footprint and compliance with international standards. These features reflect Panasonic's commitment to sustainability and innovation, making these models a leading choice for consumers looking to balance comfort, efficiency, and environmental responsibility.

In summary, Panasonic's CS-E12NKUAW, CU-E12NKUA, CU-E9NKUA, CSU-2E18NBU, and CS-E9NKUAW models represent some of the best in today's air conditioning market, with key features including energy efficiency, user-friendly controls, advanced air purification, and robust outdoor units designed for performance and reliability. These units provide an ideal solution for maintaining a comfortable home environment while being conscious of energy use and environmental impact.