Panasonic CW-XC243HU manual About the Controls on the Air Conditioner, Display Remote Control

About the Controls on the Air Conditioner

Controls

DISPLAY

2 6

4 3 7

REMOTE CONTROL

	1		OPERATION
			TEMP
8			3
		TIMER	AIR
	6		SWING
			7
		MODE	FAN SPEED
1	2		4
	5	ECONOMY

About the Controls on the Air

Precaution: The Remote Control unit will not function properly if strong light strikes the sensor window of the air conditioner or if there are obstacles between the Remote Control

Conditioner

unit and the air conditioner.

OPERATION BUTTON

•To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.

•This button takes priority over any other buttons.

•When you first turn it on, the air conditioner is on the High cool mode and the temp. at 72°F(22°C)

OPERATION MODE SELECTION BUTTON Every time you push this button, it will toggle between COOL, FAN.

ROOM TEMPERATURE SETTING BUTTON This button can automatically control the temperature of the room. The temperature can be set within a range of 60°F to 86°F by 1°F. (16°C to 30°C by 1°C)

Select the lower number for lower temperature of the room.

FAN SPEED SELECTION BUTTONS Every time you push this button, it is set as follows.

{High(F3) → Low(F1) → Med(F2) → High(F3)...}.

ECONOMY

•If the switch is set to "On", the fan stops when the compressor stops cooling. Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.

ON/OFF TIMER BUTTON

You can set the time when the unit will turn on or turn off automatically by pressing the timer button. If the unit is operating, this button controls the time it will be turned off. If the unit is off state, this button controls the time it will start. Every time you push this button, the remaining time will be set as follows.

- STOPPING OPERATION

•Every time you push this button, when the air conditioner is operating, timer is set as follows. (1Hour → 2Hours → 3Hours → 4Hours → 5Hours → 6Hours → 7Hours → 8Hours → 9Hours → 10Hours → 11Hours → 12Hours → 0Hours → 1Hours → 2Hours → ...)

•The Setting Temperature will be raised by 2°F(1°C) 30min. later and by 2°F(1°C) after another 30 min.

- STARTING OPERATION

•Every time you push this button, when the air conditioner is not operating, timer is set as follows. (1Hour → 2Hours → 3Hours → 4Hours → 5Hours → 6Hours → 7Hours → 8Hours → 9Hours → 10Hours → 11Hours → 12Hours → 0Hours → 1Hours → 2Hours → ...)

AIR SWING BUTTON

This button can automatically control the air flow direction.

REMOCON SIGNAL RECEIVER

5