Panasonic CW-XC244HU, CW-XC184HU manual Slide the unit into the cabinet.See Fig

5.Pull each Frame curtain fully to each window sash track, and pull the bottom window sash down behind the Top retainer bar until it meets.

6.Attach each Frame curtain the window sash by using screws (Type C.) (See Fig. 9)

Screw(Type C)

Fig. 9

7. Slide the unit into the cabinet.(See Fig. 10)

CAUTION: For security purpose, reinstall screws at cabinet's sides.

Screw

Power Cord

Screw

Fig. 10

8. Cut the Foam-strip to the proper length and	Foam-Strip
insert between the upper window sash and
the lower window sash.(See Fig. 11)
	Fig. 11

9.Attach the Window locking bracket with a screw (Type C.) (See Fig. 12)

Window locking bracket

Fig. 12

Features and

10.Attach the front grille to the cabinet by inserting the tabs on the grille into the tabs on the front of the cabinet. Push the grille in until it snaps into place.(See Fig.13)

11.Lift the inlet grille and secure it with two screws (Type A) through the front grille.(See Fig. 13)

NOTE: Please refer p.6 for setting ventilation kit.

12.Window installation of room air conditioner is now completed. See ELECTRICAL DATA for attaching power cord to electrical outlet.

Fig. 13

Fig. 14

Installation

13