Features and Installation

Window Requirements

NOTE: All supporting parts should be secured to firm wood, masonry, or metal.

1.This unit is designed for installation in standard double hung windows with actual opening widths of 22" to 36". The upper and lower sash must open sufficiently to allow a clear vertical opening of 13" from the bottom of the sash to the window stool.

2.If a storm window presents interference, fasten a 2" wide wood strip to the inner window sill across the full width of the sill. The wood strip should be thick enough to raise the height of the window sill so that the unit can be installed without interference by the storm window frame.

See Fig. 5-2. The top of the wood strip should be approximately 3/4" higher than the storm window frame (STORM WINDOW FRAME) or wood strip (OUTDOORS) to help condensation to drain properly to the outside.

3.Install a second wood strip (approximately 18" long by 11/2" wide and same thickness as first strip) in the center of the outer sill flush against the back off the inner sill. This will raise the L bracket as shown in Fig. 5-2.

4.The thickness of the second wood strip may not be the same as the first wood strip.

The thickness of the second wood strip must be defined to keep the 3/4 inch distance between the inner sill or the top of the first wood strip and the outer sill.

INNER

WOOD STRIP MOUNTED

1"

3/4"

SILL

ON TOP OF INNER SILL

 

 

 

 

CLEARANCE

 

 

 

 

STORM

 

 

INNER

 

WINDOW

 

 

 

FRAME

 

 

SILL

 

 

 

 

WOOD STRIP

 

 

 

FOR L BRACKET

 

 

OUTER

 

 

OUTER

 

SILL

 

 

SILL

INDOORS

OUTDOORS

INDOORS

 

OUTDOORS

 

Fig. 5-1

 

Fig. 5-2

 

Installation

HARDWARE

TYPE A: Qty:11

TYPE B: Qty:5

TYPE C: Qty:3

DRAIN PIPE

(SHORT SCREW)

(WOOD SCREW)

(L BRACKET)

Qty:1

25/64"

(10mm)

5/8"

(16mm)

 

 

TYPE D: Qty:1

TYPE E: Qty:1

TYPE F: Qty:2

TYPE G: Qty:1

(SEAL STRIP)

(SASH SEAL)

(GUIDE PANEL)

(SUPPORT BRACKET)

(Adhesive backed)

(Not adhesive backed)

 

 

10

Page 9 Page 11
Page 10
Image 10
Panasonic CW-XC54HU, CW-XC54HK manual Window Requirements, Outer Sill Indoors Outdoors, Hardware, Type C Qty3, Type F Qty2
Page 9 Page 11

CW-XC54HK, CW-XC54HU specifications

The Panasonic CW-XC54HK and CW-XC54HU are cutting-edge air conditioning solutions that exemplify modern innovation in climate control. Known for their efficiency, these models are designed to provide superior cooling and heating performance in residential and commercial spaces.

One of the standout features of these models is their powerful inverter technology. This allows the units to adjust their cooling and heating output based on the room’s temperature, ensuring that energy consumption is minimized while maintaining comfort. The inverter system is more efficient than traditional fixed-speed units, which means that users can enjoy lower energy bills without sacrificing performance.

Both the CW-XC54HK and CW-XC54HU are equipped with a high-efficiency air filter that helps in purifying the air. This is particularly beneficial for those who suffer from allergies or respiratory issues, as the filters capture dust, pollen, and other airborne particles, enhancing indoor air quality. Additionally, the filters are easy to clean and maintain, prolonging the system’s life while ensuring optimal performance.

Another key characteristic of these models is their quiet operation. Panasonic has engineered the CW-XC54HK and CW-XC54HU to run at low noise levels, making them ideal for bedrooms, offices, and other environments where noise disruption is a concern. The incorporation of silent fan technology further adds to this feature, offering users a peaceful atmosphere.

The sleek and modern design of these units ensures they fit seamlessly into any interior décor. With a user-friendly remote control, operating the air conditioning system becomes incredibly convenient. The models also feature various modes, including cooling, heating, dehumidifying, and auto mode, which can easily be selected based on the user’s needs.

Energy efficiency is a significant consideration for many consumers today, and both the CW-XC54HK and CW-XC54HU boast impressive energy ratings. They utilize advanced refrigerants that not only enhance cooling efficiency but are also environmentally friendly, aligning with global efforts to reduce the carbon footprint.

In summary, the Panasonic CW-XC54HK and CW-XC54HU represent the pinnacle of air conditioning technology, combining efficiency, design, and user-friendly features. These models are perfect for anyone looking to find a reliable and effective solution for their temperature control needs.
Top Page Image Contents