Installation Kit Contents
1 | 2 | 3 | 4 |
|
|
5 | 6 | 7 | 8 | 11 | 9 |
10 |
|
|
|
|
|
12 |
|
|
|
|
|
Suggested Tool Requirements
NO. | NAME OF PARTS | Q'TY |
1 | FRAME CURTAIN | 2 |
2 | SILL SUPPORT | 2 |
3 | BOLT | 2 |
4 | NUT | 2 |
5 | SCREW(TYPE A) (10mm (25/64")) | 16 |
6 | SCREW(TYPE B)D5.1mm(3/16")/16mm(5/8") | 3 |
7 | SCREW(TYPE C)D4.1mm(5/32")/16mm(5/8") | 5 |
8 | 1 | |
9 | 1 | |
10 | WINDOW LOCKING BRACKET | 1 |
11 | 1 | |
12 | DRAIN PIPE | 1 |
■Top retainer bar is in the product package.
SCREWDRIVER(+,
Features and Installation
PREPARATION OF CHASSIS
1.Remove the screws which fasten the cabinet at both sides and at the back.
2.Slide the unit from the cabinet by gripping the base pan handle and pulling while bracing the cabinet.
3.Cut the window sash seal to the proper length.
Peel off the backing and attach the
to the underside of the window sash.
4.Remove the backing from the top upper guide
and attach it to the bottom of the upper guide
5.Attach the upper guide onto the top of the cabinet with 3 type A screws from underneath the top of the cabinet.
6.Insert the Frame Curtain 
into the upper guide.
11
(Type A)
5
Shipping
Screws
9
7. Fasten the curtains to the unit with 4 Type A screws.
5
Lower guide
5
12(Type A) Lower guide
