Remote controller
Precaution: The Remote Controller will not function properly if strong light strikes the sensor window of the air conditioner or if there are obstacles between the Remote Controller and the air conditioner.
Model: | Models: |
|
|
1 | OPERATION |
| 1 | OPERATION |
|
|
| ||
| TEMP | 5 |
| TEMP |
| AIR |
| 5 | |
TIMER |
| TIMER | ||
SWING |
| |||
3 |
| 7 | 3 |
|
|
|
|
| |
MODE | FAN SPEED |
| MODE | FAN SPEED |
2 |
| 4 | 2 | 4 |
ECONOMY |
| ECONOMY | ||
6 |
|
| 6 |
|
About the Controls on the Air Conditioner
OPERATION
•To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
•This button takes priority over any other buttons.
•When you first turn it on, the air conditioner is on the High cool mode and the temp. at 72°F (22˚C).
MODE
•Every time you push this button, it will toggle between COOL, FAN and DRY.
•Every time you push this button,it will toggle between COOL, ECONOMY, FAN and DRY. (Models:
ON/OFF TIMER
- STOPPING OPERATION
•Every time you push this button, when the air conditioner is operating, timer is set as follows. (1Hour → 2Hours → 3Hours → 4Hours → 5Hours → 6Hours → 7Hours → 8Hours → 9Hours → 10Hours → 11Hours → 12Hours → O)
•The Setting Temperature will be raised by
2°F (1°C) 30 min. later and by 2°F (1°C) after another 30 min.
- STARTING OPERATION
•Every time you push this button, when the air conditioner is not operating, timer is set as follows. (1Hour → 2Hours → 3Hours → 4Hours → 5Hours → 6Hours → 7Hours → 8Hours → 9Hours → 10Hours → 11Hours → 12Hours → O)
FAN SPEED
•Every time you push this button it is set as follows. {High(F3) → Low(F1) → Med(F2) → High(F3)...}.
TEMPERATURE SETTING
•This button can automatically control the temperature of the room.
The temperature can be set within a range of 60°F to 86°F by 2°F.(16˚C to 30˚C by 1˚C) Select the lower number for lower temperature of the room.
ECONOMY
•If the switch is set to "On", the fan stops when the compressor stops cooling. Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.
AIR SWING
•This button can automatically control the air flow direction.
DRY
•When this unit is in dry mode, the fan rotates in low speed. The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and the unit checks the room air temperature to set itself.
7
