Display Section
1.
/ 
/ 
/ 
(Fan mode select) indication
The selected fan mode is displayed.
2.
(Flap position) indication
Indicates the flap position.
3.
(Swing) indication Appears while the flap swings.
4.
(Outing) indication
( 
Outing Function)
Appears when the outing function is set.
5.Operation Mode indication
Displays the selected operation mode. (AUTO
/HEAT
/DRY
/COOL
/ FAN
).
6.Upper and lower limit indication of the outing function
: Indicates the upper limit of the temperature
:Indicates the lower limit of the temperature
7.Temperature indication Indicates the set temperature.
8.°F / °C (Temperature unit) indication
9.
(Remote control sensor) indication Appears when the remote control sensor is used.
10.(Centralized control) indication Appears when operated in centralized control. If the remote control operation is not permitted to the remote unit, when the 
(Start/Stop) button, 
(Mode select) button,
(Fan speed) button, 
(Swing/Air direction)
button or 
(Temperature setting) buttons are pressed, flashes and rejects the change.
11.
(Disabled feature) indication
Displayed if the selected feature was disabled during installation.
12. 
(Heating standby mode) indication EN
appears when the fan of the indoor unit is stopped or in low fan speed.
13.
(Caution) indication
Appears when the protective device is activated or when an abnormality occurs.
14.Alarm indication
This displays alarm messages when an error occurs.
15.
(Oil) indication
Appears when the engine oil needs to be changed. (Appears when the gas heat pump air conditioner is used.)
