Advanced (Recording pictures)

[REC] mode: ·½¾

Taking Pictures using Auto Bracket

In this mode, 3 pictures are automatically recorded in the selected exposure compensation range each time the shutter button is pressed. You can select the picture with the desired exposure from the 3 pictures with different exposures.

With auto bracket d1 EV

1st picture

 

2nd picture

 

3rd picture

 

 

 

 

 

 

 

 

 

 

d0 EVj1 EVi1 EV

1 Move 3 [È] until [AUTO BRACKET] appears, set the compensation range of the exposure with 2/1.

When you do not use auto bracket, select [OFF] (0).

2 Press [MENU/SET] to finish.

You can also press the shutter button halfway to finish.

Note

When setting auto bracket, [ ] appears on the screen.

When taking pictures using auto bracket after setting the exposure compensation range, the pictures taken are based on the selected exposure compensation range.

When the exposure is compensated, the exposure compensation value appears on the lower left of the screen.

The auto bracket setting is canceled if you turn the camera off or [POWER SAVE] is activated.

When auto bracket is set, the auto review function is activated regardless of the auto review setting. (The picture is not enlarged.) You cannot set the auto review function in the [SETUP] menu.

The exposure may not be compensated with auto bracket depending on the brightness of the subject.

[Œ] is set for the flash when auto bracket is set.

Burst is canceled when auto bracket is set.

46 VQT1M59

Page 46
Image 46
Panasonic DMC-FS20 operating instructions Taking Pictures using Auto Bracket, REC mode ·½¾, With auto bracket d1 EV