Advanced (Playback)

[TITLE EDIT]

You can add text (comments) to pictures. After text has been registered, it can be included in prints using [TEXT STAMP] (P74). (Only alphabetic characters and symbols can be entered.)

1

2

Select [TITLE EDIT] on the [PLAYBACK] mode menu. (P19)

Move 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].

3

[SINGLE]

[MULTI]

Select the picture, and then

 

press [MENU/SET] to set.

[] A is displayed for pictures that have already been recorded with text in [BABY1]/[BABY2] (P50) or [PET] (P51) name settings in scene mode or [TITLE EDIT].

[MULTI] setting

Press [DISPLAY] to set (repeat), and then press [MENU/SET] to set.

The setting is canceled when [DISPLAY] is pressed again.

Titles cannot be changed or deleted in [MULTI].

A

Move 2/1 to select Move 3/4/2/1 to

the picture.

select the pictures.

4 Move 3/4/2/1 to select text and then press [MENU/SET] to register.

Press [DISPLAY] to switch text between [A] (capitals), [a] (small case) and [&/1] (special characters and numbers).

The cursor at the entry position can be moved to the left with [L], and to the right with [Z].

To enter a blank, move the cursor to [SPACE] or to delete an entered character, move the cursor to [DELETE], and press [MENU/SET].

To stop editing at any time during text entry, press [].

A maximum of 30 characters can be entered.

5

6

Move 3/4/2/1 to move the cursor to [EXIT] and then press [MENU/

SET] to end text input.

Press [] to return to the menu screen.¢

¢The menu screen is automatically restored when [MULTI] is selected.

Press [MENU/SET] to close the menu.

VQT1M59 73

Page 73
Image 73
Panasonic DMC-FS20 operating instructions Title Edit, Select the picture, and then Press MENU/SET to set, Multi setting