85
VQT1M59
Connecting to other equipment
Connection in the PTP mode (WindowsR XP, Windows VistaR and Mac OS X only)
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP mode.
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started on the camera’s LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.

Connect the camera to a prin ter via the USB connection cable A

(supplied).

AUSB connection cable (supplied)
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
BAlign the marks, and insert.
CAC adaptor (DMW-AC5PP; optional)
Use a battery with a sufficient battery power or the AC adaptor (DMW-AC5PP; optional). If the
remaining battery power becomes low while the camera and the printer are connected, the
status indicator blinks and the alarm beeps. If this happens during printing, stop printing at
once. If not printing, disconnect the USB connection cable.
When the camera is connected to the printer, the cable disconnect prohibit icon [å] appears.
Do not disconnect the USB cable while [å] is displayed.

Move 3/4 to select [PictBridge(PTP)], and then

press [MENU/SET].
1
DIGITAL
AV OUT
DC IN
A
C
B
2
USB MODE
SELECT SET
PLEASE SELECT
THE USB MODE
PictBridge(PTP)
PC
MENU
VQT1M59_ENG.book 85 ページ 2008年1月8日 火曜日 午後5時21分