Panasonic DMCFX01S Taking Pictures using Burst Mode, Number of pictures recorded in burst Mode

Advanced

Taking Pictures using Burst Mode

1 Press the burst mode button to switch the burst mode setting.

3

: High speed

;

: Low speed

;

: Unlimited¢1

;

No display: canceled

¢1 Depends on the memory size, battery power, picture size and quality (compression).

2 Take a picture.

•Hold down the shutter button fully to activate the burst mode.

∫Number of pictures recorded in burst

mode
Burst speed	Number of recordable
(pictures/	pictures (pictures)
second)
3¢2	max. 6	max. 8
2¢2

Depends on the

approx. 1.5 remaining capacity of the card.

¢2 The burst speed is constant regardless of the transfer speed of the card.

44

•The number of pictures indicated is when the shutter speed is faster than 1/60 and the flash is not activated.

•In simple mode [], the settings become as follows. [ ] appears on the left of the screen. (P25)

–[ ENLARGE]:

/Max. 6 pictures

–[ 4qk6q/10k15cm]/[E-MAIL]:

/Max. 8 pictures

•When the burst mode setting is set to Unlimited

–You can take pictures until the capacity of the card is full.

–The burst speed will become slower halfway. The burst speed of a MultiMediaCard becomes even slower than that of an SD Memory Card. However, the exact timing of this depends on the number of recordable pictures and the card.

•The focus is fixed when the first picture is taken.

•When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3.

•Burst mode is not canceled when the camera is switched off.

•When auto bracket and burst mode are set simultaneously, auto bracket will be performed.

•The exposure and the white balance vary depending on the burst mode setting. When

burst mode is set to [ ] or [ ], they are fixed to the values set for the first picture.

When the burst speed is set to [ ], they are adjusted each time you take a picture.

•When burst mode is set, the auto review function is activated regardless of the auto review setting. (The picture is not enlarged.) You cannot set the auto review function in the [SETUP] menu.

•When burst mode is activated, [AUDIO REC.] cannot be used.

•When the flash is activated or [STARRY SKY] in scene mode is selected, you can take only 1 picture.

VQT0V86