Advanced

Taking Pictures with the Self-timer

1 Press 2 [ ] to select the self-timer mode.

3

: Self-timer set to 10 seconds

;

: Self-timer set to 2 seconds

;

No display: canceled

2 Press the shutter button halfway to focus and then press it fully to take the picture.

3

CANCEL MENU

A: Press the shutter button halfway to focus.

B: Press the shutter button fully to take the picture.

The self-timer indicator

C blinks and the shutter is activated after 10 seconds (or

2 seconds).

If you press [MENU/SET] while the self-timer is set, the self-timer setting is canceled.

40

When using a tripod etc., setting the self-timer to 2 seconds is a convenient way to avoid the jitter caused by pressing the shutter button.

When you press the shutter button once fully, the subject is automatically focused just before recording. In dark places, the self-timer indicator will blink and then may turn on brightly operating as an AF assist lamp (P68) to allow the camera to focus on the subject.

In simple mode [], the self-timer is fixed to 10 seconds.

In [SELF PORTRAIT] (P49) in scene mode, the self-timer is fixed to 2 seconds.

When you set the self-timer in burst mode, the camera starts taking a picture 2 or 10 seconds after the shutter button is pressed. The number of pictures taken at one time is fixed to 3.

We recommend using a tripod when recording with the self-timer. (When you use a tripod, make sure the tripod is stable when the camera is attached to it.)

The self-timer cannot be used in [UNDER WATER] (P53) in scene mode.

VQT0V86

Page 40
Image 40
Panasonic DMC-FX01, DMCFX01P, DMCFX01K, DMCFX01W Taking Pictures with the Self-timer, Press 2 to select the self-timer mode