Panasonic DMCFX01W Press 4 to select PictBridge PTP and then press MENU/ SET, Single picture

Connecting to other equipment

1 Turn on the camera and the printer.

2 Connect the camera to a printer via the USB connection cable A (supplied).

•Connect the USB connection cable with the [ ] mark facing the [2] mark on the [DIGITAL] socket.

•Hold the USB connection cable at C and insert straight in or take straight out.

3 Press 4 to select [PictBridge (PTP)] and then press [MENU/ SET].

USB MODE

PLEASE SELECT

THE USB MODE.

	PC
	PictBridge(PTP)	MENU
SELECT	SET MENU	/SET

•If you set [USB MODE] in the [SETUP] menu to [PictBridge (PTP)] in advance, it is not necessary to set this every time you connect to a PC. (P20)

•Do not use any other USB connection cables except the supplied one.

•To print the age in [BABY1]/[BABY2] (P51) in scene mode or the departure date for [TRAVEL DATE] (P54), use the software [LUMIX Simple Viewer] in the CD-ROM (supplied) and print from the PC. For information about this, refer to the separate operating instructions for PC connection.

•To find out more about PictBridge compliant printers, contact your local dealer.

∫Single picture

1Press 3 to select

[SINGLE PICTURE] and then press [MENU/SET].

PictBridge

SINGLE PICTURE

DPOF PICTURE

			MENU
SELECT	SET	MENU	/SET

2 Press 2/1 to select the picture and then press 4.

PictBridge 100_0001

1/3

PLEASE SELECT

THE PICTURE TO PRINT

SELECT
PRINT	EXIT MENU

•The message disappears in about 2 seconds.

3 Press 3 to select [PRINT START] and then press [MENU/SET].

SINGLE PICTURE
PRINT START
PRINT WITH DATE	１秒
NUM. OF PRINTS	1 OFF
PAPER SIZE
PAGE LAYOUT		MENU
CANCEL SELECT	SET MENU	/SET

• Press [MENU/SET] to cancel printing.

4 Disconnect the USB connection cable after printing.

83

VQT0V86