Panasonic DMCFX30K, DMC-FX30 operating instructions About the Built-in Memory/the Card optional

Preparation

B: Do not touch the connection terminals of the card.

•The card may be damaged if it is not fully inserted.

3 1 Close the card/battery door.

2Slide the release lever in the direction of the arrow.

•If the card/battery door cannot be completely closed, remove the card, check its direction and then insert it again.

•Remove the battery after use. Store the removed battery in the battery carrying case (supplied).

•Do not remove the battery until the LCD monitor and the status indicator (green) turn off as the settings on the camera may not be stored properly.

•The supplied battery is designed only for the camera. Do not use it with any other equipment.

•Do not insert or remove the battery or the card while this unit is turned on. The data on the built-in memory or the card may be damaged. Be particularly careful while the built-in memory or the card is being accessed. (P21)

•We recommend using a Panasonic card.

About the Built-in Memory/the Card (optional)

The built-in memory can be used as a temporary storage device when the card being used becomes full.

∫Built-in Memory []

•You can record or play back pictures with the built-in memory. (The built-in memory cannot be used when a card is inserted.)

•The built-in memory capacity is about 27 MB.

•Picture size is fixed to QVGA

(320k240 pixels) when recording motion pictures to the built-in memory. (P51)

∫Card [ ]

You can record or play back pictures on a card.

∫Card (optional)

•The SD Memory Card, SDHC Memory Card and MultiMediaCard are small, lightweight, removable external cards.

•The SDHC Memory Card is a memory card standard decided by the SD Association in 2006 for high capacity memory cards more than 2 GB.

•The reading/writing speed of an SD Memory Card and an SDHC Memory Card is fast. Both types of card are equipped with a Write-Protect switch A that prevents writing and formatting the card. (If the switch is slid to the [LOCK] side, it is not possible to write or delete data on the card and format it. When the switch is slid to the other side, these functions become available.)

2

13

VQT1B86