Advanced (Recording pictures)

Shutter speed for each flash setting

 

 

Flash setting

Shutter speed

 

 

(Sec.)

 

 

 

 

 

 

 

 

 

: AUTO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

: AUTO/

 

 

 

 

 

 

 

 

 

Red-eye

 

 

 

 

 

reduction

1/30 to 1/2000

 

 

 

 

 

 

 

 

 

: Forced ON

 

 

 

 

 

 

 

 

 

: Forced ON/

 

 

 

 

 

 

 

 

 

Red-eye

 

 

 

 

 

reduction

 

 

 

 

 

 

 

 

 

 

 

: Slow sync./

1/8¢1 to

 

 

 

 

Red-eye reduction

1/2000

 

 

 

 

 

 

 

 

 

 

 

1/8¢1 to

 

 

 

 

 

1/2000

 

 

 

 

: Forced OFF

1/8¢1 or 1 to

 

 

 

 

1/2000¢2

 

 

 

 

 

 

 

 

 

 

1/4 or 1 to

 

 

 

 

 

1/2000¢3

¢1 The shutter speed changes depending on the slow shutter setting. (P66)

¢2 Simple mode [ ]

¢3 Intelligent ISO sensitivity mode [ ]/ [SPORTS] (P45), [BABY1]/[BABY2] (P46) and [PET] (P47) in scene mode

¢2, ¢3: The shutter speed becomes a maximum of 1 second in the following cases.

When the optical image stabilizer is set to [OFF].

When the camera has determined that there is little jitter when the optical image stabilizer is set to [MODE1] or [MODE2].

There will be differences in the above shutter speeds in the following scene modes.

[NIGHT SCENERY] (P45):

8 seconds to 1/2000th of a second

[STARRY SKY] (P48):

15 seconds, 30 seconds, 60 seconds

[FIREWORKS] (P49):

1/4th of a second, 2 seconds

Do not look directly at the flash at close range when it is activated.

If you bring the flash too close to an object, the object may be distorted or discolored by the heat or lighting from the flash.

In economy mode, the LCD monitor turns off and the status indicator lights while the flash is charging. [This does not happen when using the AC adaptor (DMW-AC5PP; optional).]

If the remaining battery power is low, the length of time that the LCD monitor turns off to charge may become longer.

When you take a picture beyond the available flash range, the exposure may not be adjusted properly and the picture may become bright or dark.

When the flash is being charged, the flash icon blinks red, and you cannot take a picture even when you press the shutter button fully.

The white balance may not be properly adjusted if the flash level is insufficient for the subject. (P58)

When the shutter speed is fast, the flash effect may not be sufficient.

It may take time to charge the flash if you repeat taking a picture. Take a picture after the access indication disappears.

The red-eye reduction effect differs between people. Also, if the subject was far away from the camera or was not looking at the first flash, the effect may not be evident.

When the flash is activated, you can only take 1 picture.

37

VQT1B86

Page 37
Image 37
Panasonic DMCFX30K, DMC-FX30 operating instructions Shutter speed for each flash setting Flash setting, Red-eye Reduction