Recording pictures (basic)
Taking Pictures using Burst Mode
∫ Number of pictures recorded in burst mode
1 Press the single or burst mode button to switch the burst mode setting and then take pictures.
3
: High speed
;
: Low speed
;
: Unlimited¢
;
No display: cancelled
¢Depending on the memory size, battery power, picture size and quality (compression)
•Hold down the shutter button fully to activate the burst mode.
| Burst speed | Number of recordable | |
| (pictures/ | pictures (pictures) | |
| second)¢ |
|
|
|
|
|
|
| 3 | max. 3 | max. 5 |
|
|
|
|
| 2 | max. 3 | max. 5 |
|
|
|
|
| approx. 1.5 | Depends on remaining | |
| capacity of the card | ||
|
| ||
|
|
|
|
¢When the shutter speed is faster than 1/60 and the flash is not activated
•The burst speed is constant regardless of the transfer speed of the card.
•When the burst mode setting is set to Unlimited
–You can take pictures until the capacity of the card becomes full.
–The speed of taking pictures becomes slow during a recording.
•The focus is fixed at taking the first picture.
•In simple mode [
], the burst speed is fixed to Low.
•When the
•When the burst mode is activated, [AUDIO REC.] cannot be used.
•If the flash is activated, you can record only 1 picture.
•When setting auto bracket and the burst mode simultaneously, auto bracket will be performed.
43
VQT0R57
