Preparation
Setting Date/Time (Clock Set)
∫Initial setting
The clock is not set when the camera is shipped. When you turn the camera on, the following screen appears.
PLEASE SET THE CLOCK
CLOCK SET MENU
2 Select [D/M/Y], [M/D/Y] or [Y/M/D].
CLOCK SET
10:00111.DEC.2005
D/M/Y
SELECT
SET
EXIT MENU
•When pressing the [MENU] button, the screen shown in step 1 appears.
•The screen disappears after about
5 seconds. Turn the camera on again or press the [MENU] button, select [CLOCK SET] in page 2/3 of the [SETUP] menu (P19) and set the clock in steps 1 and 2.
1 Set date and time.
CLOCK SET
00 : 00 11. JAN . 2005 
D/M/Y
SELECT
SET
EXIT MENU
•2/1: Select the desired item.
•3/4: Set date and time.
•Close the menu by pressing the [MENU] button 2 times after finishing the setting.
•Check if the clock setting is correct, after turning the camera off and on.
•When a fully charged battery has been inserted for more than 24 hours, the clock setting is stored (in the camera) for at least 3 months even if the battery is removed. (The storing time may be shorter if the battery is not charged sufficiently.)
If more than 3 months has passed, the clock setting will be lost. In this case, set the clock again.
•You can set the year from 2000 to 2099. The
•When you use a photo printing service, if the date is not set in the camera, it will not be printed, even if the store provides a date printing option to your photo.
•For the date print setting, refer to P76.
18
VQT0R57
