Preparation
16
VQT0R26
Inserting/Removing the Card•Check that the camera is turned off and
that the lens is retracted.
1Slide the release lever to the
direction of arrow, and open the
card/battery door.
•The card and the data may be
damaged if it is inserted or removed
while the camera is turned on.
•We recommend using Panasonic’s
SD Memory Card. (Use only genuine
SD cards with an SD Logo.)
2Insert:
Insert the card fully with the label
side facing the front of the
camera until it clicks.
Remove:
Push the card until it clicks, then
pull the card out upright.
•Check the direction of the card.
•Do not touch the connection terminals
on the back side of the card.
•The card may be damaged if it is not
fully inserted.
31Close the card/battery door.
2Slide the release lever to the
direction of arrow.
•If the card/batter y door cannot be
completely closed, remove the card and
insert it again.