Recording pictures (basic)
44
VQT0R26
Taking Pictures using Burst Mode

1Press the single or burst mode

button to switch the burst mode

setting and then take pictures.

: High speed
;
: Low speed
;
:Unlimited
¢
;
No display: canceled
¢Depending on the memory size,
battery power, picture size and quality
(compression)
•Hold down the shutter button fully to
activate the burst mode.
∫Number of pictures recorded in burst
mode
¢When the shutter speed is faster than
1/60 and the flash is not activated
•The burst speed is cons tant regardless of
the transfer speed of the card.
•When the burst mode setting is set to
Unlimited
–You can take pictures until the capacity
of the card becomes full.
–The speed of taking pictures becomes
slow during a recording.
•The focus is fixed at taking the first
picture.
•In simple mode [ ], the burst speed is
fixed to Low.
•When the self-timer is used, the number
of recordable pictures in burst mode is
fixed to 3.
•When the burst mode is activated, [AUDIO
REC.] cannot be used.
•If the flash is ac tivated, you can record
only 1 picture.
•When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed.
3
Burst speed
(pictures/
second)¢
Number of recordable
pictures (pictures)
3 max. 3 max. 5
2 max. 3 max. 5
approx. 1.5 Depends on remaining
capacity of the card