Panasonic DMC-FZ5GN Inserting/Removing the Card

Preparation
15
VQT0Q40
Inserting/Removing the Card
•Check that the camera is turned off and
that the lens is retracted.
•Close the flash.
1Slide the card/battery door to
open it.
•The card and the data may be
damaged if it is inserted or removed
while the camera is on.
•We recommend using Panasonic’s SD
Memory Card. (Use only the genuine
SD card with SD Logo.)
2Insert:
Insert the card fully until it clicks
and it is locked with the label
facing the front of the camera.
Remove:
Push the card until it clicks, then
pull the card out upright.
•Check the direction of the card.
•Do not touch the connect ion terminals
on the back side of the card.
•The card may be damaged if it is not
fully inserted.
31Close the card/battery door.
2Slide the card/battery door to
the end and then close it firmly.
•If the card/battery door cannot be
completely closed, remove the card and
insert it again.
VQT0Q40ENG.book 15 ページ ２００５年２月１６日 水曜日 午後２時４７分