Recording Menu Settings
74
VQT0Q40
You can take a picture with audio.
•When you set [AUDIO REC.] to [ON],
[ ] appears on the screen.
•When you start recording by focusing on
the subject and pressing the shutter
button, the audio recording will be
automatically stopped in about 5 seconds.
There is no need to keep pressing the
shutter button.
•Audio is recorded from the built-in
microphone of the camera.
•If you press the [MENU ] button during the
audio recording, the audio recording will
be cancelled. The audio cannot be
recorded.
•You cannot record pictures with audio in
auto bracket, burst mode or when the
quality is set to [TIFF].
•When audio is recorded with each pict ure,
the total number of pictures that can be
stored on each card will slightly decrease.
You can switch to the following metering
modes.
Audio Recording [AUDIO REC.]
Metering Mode[METERINGMODE]
Multiple:
This is the method in which the
camera measures the most suitable
exposure by judging the allocation of
brightness on the whole screen
automatically. Usually, we
recommend using this method.
Centre weighted:
This is the method used to focus on
the subject on the centre of the
screen and measure the whole
screen evenly.
Spot:
This is the method to measure the
subject in the spot metering target
A.
VQT0Q40ENG.book 74 ページ ２００５年２月１６日 水曜日 午後２時４７分