Recording pictures (basic)
42
VQT0Q40
•Do not stare at the photo flash from
close proximity.
•If you bring the flash too close to the
subjects, they may be distorted or
discoloured by its heat and lighting.
•Do not cover the photo flash with your
fingers or any other items.
•When you take a picture beyond the flash
control range, the exposure may not be
adjusted properly and the picture may
become bright or dark.
•When you repeat taking a picture,
recording may be disabled even if the
flash is activated. Take a picture after the
access indication disappears.
•When the jitter alert appears, we
recommend using the flash.
•When you set to burst mode or auto
bracket, only 1 picture is recorded for
every flash activated.
•The flash icon turns red when activating
the flash and pressing the shutter button
halfway.
•When the flash is b eing charged, the flash
icon blinks red, and you cannot take a
picture even when you press the shutter
button fully.
•When t aking a picture with the flash,
we recommend removing the lens
hood. In some cases it may not allow
the scene to be illuminated properly.
•Do not close the flash soon after the flash
is activated prior to taking pictures due to
AUTO/Red-eye reduction etc. It causes a
malfunction.
•When taking a picture with the flash, the
white balance will be automatically
adjusted [except for [ ] (Daylight) and
[ ] (Flash)], but the white balance may
not be properly adjusted if the flash level
is insufficient.
•When the shu tter speed is fast, the flash
effect may not be sufficient.
VQT0Q40ENG.book 42 ページ ２００５年２月１６日 水曜日 午後２時４７分