Recording pictures (basic)
41
VQT0Q40
∫Shutter speed for each flash setting
•Refer to P58 for the Aperture-priority AE, Shutter-priority AE or Manual exposure mode.
∫Adjusting flash output
Adjust the flash output when the subject is
small or reflection ratio is extremely high or
low.
1Press 3 several times until [ FLASH] appears and then set the flash output.•You can adjust this from j2EV to
i2 EV in steps of 1/3 EV.
•The flash output setting is memorised
even if the camera is turned off.
•In motion image mode [ ], simple
mode [ ], [SCENERY], [NIGHT
SCENERY] or [FIREWORKS] in scene
mode (P62), you cannot adjust the flash
output.
Flash setting Shutter speed (Sec.)
: AUTO 1/60– 1/2000
: AUTO/Red-eye reduction 1/60– 1/2000
: Forced ON
: Forced ON/Red-eye reduction 1/60– 1/2000
: Slow sync./Red-eye reduction 1 –1/2000
: Forced OFF
1/4– 1/2000
8– 1/2000
(In [NIGHT SCENERY] in
scene mode)
FLASH
SELECT EXIT
VQT0Q40ENG.book 41 ページ 2005年2月16日 水曜日 午後2時47分