Panasonic DMC-SZ7 owner manual Display so that they are displayed, Vertically

Basic

M[Rotate Disp.]

This mode allows you to display pictures vertically if they were recorded holding the camera vertically.

[	] ([On]):	Rotate pictures on a TV and the LCD
		display so that they are displayed
		vertically.

[ ] ([External Only]): Rotate only the picture on a TV so that it is displayed vertically.

[OFF]

•Refer to P32 for information about how to play back pictures.

•When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the OS or software is compatible with Exif. Exif is a file format for still pictures which allows recording information etc. to be added. It was established by “JEITA (Japan Electronics and Information Technology Industries Association)”.

•It may not be possible to rotate pictures that have been recorded with other equipment.

•The display is not rotated during Multi Playback.

[Version Disp.]

It is possible to check which version of firmware is on the camera.

•Press [MENU/SET] on the version display screen to display information about the software on the unit.

[Format]

The built-in memory or card is formatted. Formatting irretrievably deletes all the data so check the data carefully before formatting.

•Use a battery with sufficient battery power when formatting. Do not turn the camera off during formatting.

•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card.

•If the card has been formatted on a PC or other equipment, format it on the camera again.

•It may take longer to format the built-in memory than the card.

•If the built-in memory or the card cannot be formatted, consult your nearest Service Center.

For USA and Puerto Rico assistance, please call:

1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call:

1-800-99-LUMIX (1-800-995-8649) or

send e-mail to: lumixconcierge@ca.panasonic.com

~[Language]

Set the language displayed on the screen.

•If you set a different language by mistake, select [~] from the menu icons to set the desired language.

- 48 -