16
•5. How to returned to Normal Display:Turn the power off and on, to exit from Error code display mode.NOTE:The error code can not be initialized.
LENS Adj.History OIS 1900 2000 OIS adj. Yaw direction amplitude error (small)
OIS Unit, LENS flex breaks.
3000 OIS adj. Pitch direction amplitude error (small)
OIS Unit, LENS flex breaks.
4000 OIS adj. Yaw direction amplitude error (large)
OIS Unit, LENS flex breaks.
5000 OIS adj. Pitch direction amplitude error (large)
OIS Unit, LENS flex breaks.
6000 OIS adj. MREF error
OIS Unit, LENS flex breaks.
7000 OIS adj. time out error
Zoom motor, Focus motor, LENS flex breaks.
8000 OIS adj. Yaw direction off set error
OIS Unit.
9000 OIS adj. Pitch direction off set error
OIS Unit.
A000 OIS adj. Yaw direction gain error
OIS Unit.
B000 OIS adj. Pitch direction gain error
OIS Unit.
C000 OIS adj. Yaw direction position sensor error
OIS Unit, LENS flex breaks.
D000 OIS adj. Pitch direction position sensor error
OIS Unit, LENS flex breaks.
E000 OIS adj. other error
OIS Unit, LENS flex breaks.
HARD VENUS A/D Flash 2800 0000 Flash charging error.
IC6001-(279) signal line or Flash charging circuit
FLASH ROM
(EEPROM
Area)
FLASH ROM
(EEPROM
Area)
2B00 0001 EEPROM read error
IC6002 (FLASH ROM)
0002 EEPROM write error
IC6002 (FLASH ROM)
SYSTEM RTC 2C00 0001 SYSTEM IC initialize error
Communication between IC6001 (VENUS 3) and IC9101 (SYSTEM)
SOFT CPU Reset 3000 0001
|
0007
NMI reset
Non Mask-able Interrupt
(30000001-30000007 are caused by factors)
Card Card 3100 0001 Card logic error
SD card data line or IC6001 (VENUS 3)
0002 Card physical error
SD card data line or IC6001 (VENUS 3)
0004 Write error
SD card data line or IC6001 (VENUS 3)
3900 0005 Format error
CPU,
ASIC hard Stop 3800 0001 Camera task finish process time out.
Communication between Lens system and IC6001 (VENUS 3)
0002 Camera task invalid code error.
IC6001 (VENUS 3)
0100 File time out error in recording motion image
IC6001 (VENUS 3)
0200 File data send error in recording motion image
IC6001 (VENUS 3)
Operation Power on 3B00 0000 FLASHROM processing early period of camera during movement.
Zoom Zoom 3C00 0000 I do not complete zoom lens processing
3500 0000 I jumped into dummy processing
(0-7bit : command, 8-15bit : Status)
3501 0000 Though record preprocessing is necessary, it is not called.
3502 0000 Though record preprocessing is necessary, it is not completed.
Attribute Main item Sub item Error code Contents (Upper)
High 4 bits Low 4 bits Check point (Lower)