Panasonic DMC-TZ4, DMC-TZ5 operating instructions Select picture to print with and set

Models: DMC-TZ5 DMC-TZ4

1 116
Download 116 pages 27.01 Kb
Page 83
Image 83
SINGLE SELECT PRINT START

Connecting

2 Printing

devices

with other

 

You can connect directly to a PictBridge- compatible printer for printing.

Set-up:

Connect the camera to the AC adaptor (DMW-AC5PP, sold separately). (Alternatively, use a sufficiently-charged battery.)

• Card:Insert card Built-in memory: :Remove card

(Copy clipboard pictures to the card (P.65))

Adjust settings on your printer (print quality, etc.) as required.

Set mode dial to any setting other than

CLIPBOARD.

Hold here

• Do not disconnect

 

the USB connection

 

cable when the cable

 

disconnection icon

 

is displayed (may not

 

be displayed with some

 

printers).

 

 

Check socket direction

 

and insert straight in.

 

(Damage to socket

 

shape can lead to faulty

 

operation.)

1 Turn on power of both camera and printer

2 Set REC/PLAY switch to

3 Connect camera to printer

4 Select ‘PictBridge (PTP)’ on the camera

USB MODE

PLEASE SELECT

THE USB MODE

PictBridge(PTP)

PC

SELECT SET

When ‘CONNECTING TO PC…’ is displayed, cancel the connection and set ‘USB MODE’ to either ‘SELECT ON CONNECTION’ or ‘PictBridge(PTP)’ (P.25).

5 Select picture to print with ◄► and set

6 Select ‘PRINT START’

PRINT WITH DATE

OFF

NUM. OF PRINTS

1

PAPER SIZE

 

PAGE LAYOUT

 

CANCEL SELECT SET

USB connection cable

(Print settings P.85)

(always use cable

 

supplied)

 

If using AC adaptor, turn off camera power before plugging in or removing.

To cancel print Press ‘MENU/SET’

Do not use any other USB connection cables except the supplied one.

Disconnect USB connection cable after printing.

Turn off power before inserting or removing memory cards.

When the battery begins to run out during communication, the status indicator flashes and a warning beep sounds. Cancel printing and disconnect USB connection cable (recharge the battery before reconnecting).

Setting the ‘USB MODE’ (P.25) to ‘PictBridge (PTP)’ remove the need to make the setting each time the camera is connected to the printer.

VQT1P79 83

Page 83
Image 83
Panasonic DMC-TZ4, DMC-TZ5 Select picture to print with and set, CardInsert card Built-in memory Remove card