12 VQT3H25 (ENG) (ENG) VQT3H25 13
Inserting and removing the card (optional)/the battery■To remove
•To remove battery:
move lever in direction of arrow.
•To remove card:
press down in center.
Lever
●Always use genuine Panasonic batteries (DMW-BCG10PP).
●If you use other batteries, we cannot guarantee the quality of this
product.
●Insert the card fully, otherwise it may be damaged.
Set the camera ON/OFF switch
to OFF and slide the release
lever ( ) to [OPEN] before
opening the lid
[OPEN] [LOCK]
Insert the battery and card,
making sure that their
orientation is correct
• Battery: Insert all the way firmly until
a locking sound is heard, and
check that the lever is hooked
over the battery.
• Card: Insert all the way firmly until it
clicks.
Close lid
Slide to the [LOCK] position.
Picture save destination (cards and built-in memory)
■Built-in memory (approx. 70 MB)
●The built-in memory can be used as a temporary storage device when
the card being used becomes full.
●The access time for the built-in memory may be longer than the access
time for a card.
■Compatible memory cards (optional)
The following SD standard-based cards
(Panasonic brand recommended)
Type of Card Capacity Notes
SD
Memory Cards
8 MB – 2 GB
• Using a card of SD Speed “Class 6”* or above
is recommended for recording motion pictures.
• Can be used with devices compatible with the
respective formats.
• Before using SDXC Memory Cards, check that
your computer and other devices support this
type of card.
http://panasonic.net/avc/sdcard/information/SDXC.html
• Only the cards listed on the left with the given
capacities are supported.
SDHC
Memory Cards
4 GB – 32 GB
SDXC
Memory Cards
48 GB, 64 GB
*
SD speed class refers to a specification for sustained write speeds.
Confirm the SD speed by checking the card label or other card related
materials.
(Example)
●Latest information:
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
●Keep the Memory Card out of reach of children to prevent swallowing.