25
VQT1M97
Preparation
Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional) when
formatting. Do not turn the camera off dur ing formatting.
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
If the card has been formatted on a PC or other equipment, format it on the camera again.
It may take longer to format the built-in memory than the card.
If the built-in memory or the card cannot be formatted, consult your nearest Service
Center.
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
AJitter detection demonstration
BMovement detection demonstration
In playback mode, [JITTER, SUBJ. MOVE DEMO.] cannot be
displayed.
Press [DISPLAY] to close [JITTER, SUBJ. MOVE DEMO.].
Press [MENU/SET] to close [AUTO DEMO].
[JITTER, SUBJ. MOVE DEMO.] is an approximation.
[AUTO DEMO] has no TV output capability.
[FORMAT] The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
~ [LANGUAG E]
Set the language displayed on the screen.
[ENGLISH]/[DEUTSCH]/[FRANÇAIS]/[ESPAÑOL]/[ITALIANO]/
[繁體中文 ]¢/[¢]
¢Not displayed on DMC-FS5P, DMC-FS3P
[DEMO MODE]
Select this to display the camera’s features or [JITTER, SUBJ.
MOVE DEMO.].
[JITTER, SUBJ. MOVE DEMO.]
[AUTO DEMO]: The camera’s features are displayed as a
slide show.
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
For USA assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
DEM
O
A
B
DMC-FS5&FS3_VQT1M97.book 25 ページ 2007年12月26日 水曜日 午後11時59分