Panasonic DMCFS3S, DMCFS3K Motion Picture Mode, Press the shutter button fully to stop recording

Advanced (Recording pictures)

White balance fine adjustment

You can adjust the hue to match the water depth and the weather.

1Press 3 [È] three times to display [WB ADJUST.].

2Press 2/1 to adjust the white balance.

2	[RED]:	Press when the hue is bluish.
1	[BLUE]:	Press when the hue is reddish.

•If you adjust the white balance, [ ] appears on the screen in red or blue.

•Select [0] if you do not want to finely adjust the white balance.

Note

•The focus range becomes the same as macro mode. [5 cm (0.17 feet) (Wide)/50 cm (1.64 feet) (Tele) to ¶] (DMC-FS5)/[5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to ¶] (DMC-FS3)

[REC] mode: n

Motion Picture Mode

1

2

3

Slide the [REC]/[PLAYBACK] selector switch to [¦/!], and then press [MODE].

Press 3/4 to select [MOTION PICTURE], and then press [MENU/SET].

Press the shutter button halfway to focus

and then press it fully to start recording.	A	B
A Audio recording
• The available recording time B is displayed on the top
right and the elapsed recording time C is displayed on
the bottom right of the screen.
• After pressing the shutter button fully, release it straight
away. If the button is held down, the sound will not be
recorded for a few seconds when recording starts.
• When the subject is focused, the focus indication lights.
		C

•The focus and zoom are fixed to the setting when recording starts (the first frame).

•The audio is also recorded simultaneously from the built-in microphone on this unit. (Motion pictures cannot be recorded without audio.)

4 Press the shutter button fully to stop recording.

•If the built-in memory or the card becomes full in the middle of recording, the camera stops recording automatically.

Changing the settings for the aspect ratio and the picture quality

1 Press [MENU/SET].

VQT1M97 55