Advanced (Recording pictures)

Start recording by pressing the motion picture button.

AAvailable recording time B Elapsed recording time

• The audio is also recorded simultaneously from the built-in microphone on this unit. (Motion pictures cannot be recorded without audio.)

A

CB

•The recording state indicator (red) C will flash while recording motion pictures.

•Focus can be achieved during recording by pressing [FOCUS].

•Focus can be set manually when [MF] is displaying. (P83)

Stop the recording by pressing the motion picture button again.

•Sound will go off when pressing the motion picture button indicating start/stop of motion picture recording.

Sound volume can be set in [BEEP LEVEL] (P30).

•If the built-in memory or the card becomes full in the middle of recording, the camera stops recording automatically.

Note

•The screen will change as following when the motion picture button is pressed in steps 3 and

4.

AStill picture recording

screen

BMotion picture mode setting¢1

CMotion picture recording screen

DStill picture mode setting¢2

5

 

R1m19s

AUTO

3s

¢1 The screen that is displayed during motion picture mode setting is different depending on the setting of the [REC MODE].

¢2 [!] will not be displayed in the Creative Motion Picture Mode.

- 109 -