Panasonic DMCFZ35K, VQT2F10 Direction detection function, Preventing jitter (camera shake), Press [FOCUS] during image playback, Enlarge the focus point (display focus point)

Basic

Preventing jitter (camera shake)

When the jitter alert [] appears, use [STABILIZER] (P145), a tripod or the self-timer (P73).

•Shutter speed will be slower particularly in the following cases. Keep the camera still from the moment the shutter button is pressed until the picture appears on the screen. We recommend using a tripod.

–Slow sync./Red-eye reduction

–[NIGHT PORTRAIT] and [NIGHT SCENERY] in the Advanced Scene Mode (P90)

–In [PARTY], [CANDLE LIGHT], [STARRY SKY] or [FIREWORKS] in Scene Mode (P95)

–When the shutter speed is slowed in [MIN. SHTR SPEED]

Direction detection function

Pictures recorded with the camera held vertically are played back vertically (rotated). (Only when [ROTATE DISP.] (P165) is set to [ON])

•The direction detection function may not operate correctly if recording is performed with the camera aimed up or down.

•Motion pictures taken with the camera held vertically are not displayed vertically.

Enlarge the focus point (display focus point)

This unit will remember the focus point during the recording, and it can be enlarged with that point as a center.

Press [FOCUS] during image playback

•Focus point may not be the center of enlargement when it is at the edge of the image.

•Refer to “Using the Playback Zoom” (P56) for operation during zooming.

•It will return to the original enlargement if [FOCUS] is pressed again.

•Following pictures cannot be enlarged because there is no focus point:

–Picture that was taken without focusing

–Picture that was taken with manual focus

–Picture that was taken with a different camera

WT

- 50 -