Advanced (Recording pictures)

•Refer to P149 for the [MOTION PICTURE] Mode menu.

•The flash setting is fixed to [Œ].

•Refer to P215 for information about the available recording time.

•The available recording time displayed on the screen may not decrease regularly.

•Depending on the type of the card, the card access indication may appear for a while after recording motion pictures. This is not a malfunction.

•The operational sound of the zoom or button operation may be recorded when it is operated during the recording of a motion picture.

•The screen may be blacked out momentarily, or the unit may record noise due to static electricity or electromagnetic waves etc. depending on the environment of the motion picture recording.

•When operating the zoom when recording motion pictures, it may take time to come into focus.

•If the Extended Optical Zoom was used before pressing the motion picture button, those settings will be cleared, so the focus range will change dramatically.

•When the aspect ratio setting is different in still and motion pictures, the angle of view changes

at the start of motion picture recording. When [ REC AREA] (P32) is set to [ON], angle of view during motion picture recording is displayed.

•When recording motion pictures, the following functions cannot be used.

–[ ], [ƒ] and [Ù] in [AF MODE]

–Direction Detection Function

–Extended Optical Zoom

–[FACE RECOG.]/[ISO LIMIT SET]

•It is recommended to use a fully charged battery or AC adaptor (optional) when recording motion pictures.

•If while recording motion pictures using the AC adaptor (optional) the power supply is cut off due to a power cut or if the AC adaptor (optional) is disconnected etc., the motion picture being recorded will not be recorded.

- 110 -