Adjusting the pictures on the LCD screen
1 Press [LCD MENU].
≥It is also possible to display with the following procedures.
1Press [SUB MENU].
2Select “Other Functions” with [3, 4], and press [OK].
3 Select “LCD Menu” with [3, 4], and press [OK].
LCD Menu
Picture | Dynamic |
Brightness |
|
Color |
|
Tint |
|
Monitor | On |
SUB | RETURN |
MENU |
2 Select the item with [3, 4].
3 Change the setting with [3, 4, 2, 1].
Picture:Adjusting image quality
!Standard: Standard
!Dynamic: Picture with high contrast
! Night: | Picture suitable for viewing in dark places |
!User jBrightness: s5 to r5 jColor: s5 to r5 jTint: s5 to r5
Monitor:Displaying images
!On: Image display
! Off: | No image |
≥When “Off” is selected, select “Yes” with [2, 1], and then press [OK].
To exit the screen
Press [EXIT].
To display images when the “Monitor” is set to “Off ”
Press [LCD MENU], [SUB MENU] or [DISC/SD].
≥Underlined items are the factory presets.
≥If you are not using the LCD on this unit, select “Off”. No image mark is displayed on the lower left of the screen when it is set to “Off”.
Loading the disc or SD card
Disc
Getting started
1 Press [OPEN].
2 Set the disc and close the lid.
≥Set the disc securely until you hear a "click", with the label side up.
≥Some discs may start playing when they are loaded with the unit turned on.
≥About discs with a cartridge
jPlace the disc back into the cartridge for storage to prevent dirt and scratches after use.
≥ Do not touch the lens as it | Lens (A) | |
may make it dirty. | ||
|
SD card
1 Open the cover at the side of the unit.
2 Insert the SD card into the SD card slot.
≥With the label side up, insert the card straight in the direction shown in the figure, until you hear a sound.
3 Close the cover.
To remove the card
In step 2 above, press the center of the card until it “clicks”, and pull the card out straight.
VQT3C15
13
