Connections & Settings
9
VQT3A92
STEP 2 : Connecting to an amplifier/receiverSTEP 3 : Connecting to a broadband networkThe following services can be used when this unit is
connected to broadband.
≥Firmware can be updated (12)
≥You can enjoy BD-Live (16)
≥You can enjoy Network Service (18)
≥DLNA feature (19)
For details about connection method, refer to the
instructions supplied with the connected equipment.
≥Set “HDMI Audio Output” to “On” (24).
≥Set “Digital Audio Output” depending on the connected
amplifier/receiver (23).
≥The HDMI connection supports VIERA Link “HDAVI
Control” (20).
≥When using the TV or amplifier/receiver that does not
have the indication of “(ARC)” (non-ARC-compatible) on
the HDMI terminal, in order to e njoy TV’s sound by
amplifier/receiver it is also requir ed to connect the
amplifier/receiver and T V using an optical digital cable.
HDMI IN
AN
/100BASE-TX
HDMI IN
HDMI IN
(ARC)
(ARC)
Multi channel
speakers
Amplifier/receiver
HDMI cable
HDMI cable
(Only supplied with
DMP-BD755)
∫LAN cable connection
≥Use category 5 or above straight LAN cables (STP) when
connecting to peripher al devices.
≥Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
LAN
10BASE-T/100BASE-TX
Broadband router, etc.
LAN Cable
LAN Cable
Modem
(Broadband)
*Provided by ISP
DMP-BD75_VQT3A92_eng.book 9 ページ 2011年2月8日 火曜日 午後3時15分