Panasonic DMP-BD60GN Network connection, Firmware updating, Manually updating the firmware

Network connection

The following services can be used when this unit is connected to				≥Use shielded LAN cables when connecting to peripheral
				devices.
broadband.
			NOTE	≥When operating the VIERA CAST, use high-speed internet
≥Firmware can be updated (	below)
				service no less than 1.5 Mbps for SD (Standard Definition)
≥You can enjoy the BD-Live (	19)			and 6 Mbps for HD (High Definition) picture quality by your
≥You can enjoy the VIERA CAST ( 25)				local broadband company.
				– If using slow Internet connection, the video may not be
				displayed correctly.
				≥After connecting to the Internet, perform necessary settings.
				( 14)
				≥Inserting any cable other than a LAN cable in the LAN
				terminal can damage the unit.
Internet		Back of the unit

Straight LAN cable (not included)

Getting started

Telecommunications equipment (modem, etc.)

Hub or broadband router

≥When your communication equipment (modem), etc. has no broadband router functions: Connect a broadband router.

When your communication equipment (modem), etc. has broadband router functions but there are no vacant ports: Connect a hub.

≥Use a router that supports 10BASE-T/100BASE-TX.

Firmware updating

]

When this unit remains connected to the Internet, it will automatically check for the latest firmware version when it is turned on.

When latest firmware version is available, the following screen is displayed. Select “Yes” or “No”.

Firmware Update

The latest firmware is available. Latest Online Version: x.x Current Installed Version: x.x

Do you want to start firmware update? For the update information, please visit the following website: http://panasonic.net/support/

Yes No

≥If “Yes” is selected, then follow the on-screen instructions.

≥If “No” is selected, then manually update the firmware later. ( right)

After the latest firmware is downloaded, the system will be restarted and the firmware will be updated.

When the system is restarted, the screen display disappears and “START” is displayed on the unit’s display.

After the firmware is updated and the system is restarted, the following screen indicates that the firmware update has been completed.

The firmware has been updated.

Current Installed Version: x.x

OK

RETURN

≥During the update process, no other operations can be performed. Serious damage may occur if you turn off the unit and/or press any buttons.

NOTE

TIPS

≥Downloading will require several minutes. It may take longer or the Internet may not be connected depending on the connection environment. It is required that you use a broadband connection.

≥If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and burn it to a CD-R to

update the firmware. http://panasonic.net/support/ (This site is in English only.)

≥When the unit is connected to the Internet, communication charges may be generated.

≥If you do not want to check for the latest

firmware version when the unit is turned on, set “Automatic Update Check” to “Off”. ( 32)

Manually updating the firmware

If the firmware update is not carried out when the unit is turned on, a message is displayed when displaying the FUNCTIONS menu.

The latest firmware is available.

Please update firmware in Setup.

1)Press [SETUP].

2)Press [3, 4] to select “General” and press [OK].

3)Press [3, 4] to select “Firmware Update” and press [OK].

4)Press [3, 4] to select “Update Now” and press [OK].

5)Press [2, 1] to select “Yes” and press [OK].

RQT9407

13