Panasonic DMP-BD60GZ, DMP-BD80GN Accessory information, Using the remote control, Batteries Use

Accessory information

Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.

	(Product numbers correct as of February 2009. These may be subject to change.)
∏	∏	∏

1 Remote control	1 Audio/Video cable	2 Batteries
(N2QAYB000380)		for remote control
∏	∏	∏

	For Saudi Arabia	For Thailand
[For[Australia[and[New[Zealand]	[For]Middle]East]	[For[Asia]
1 AC mains lead	2 AC mains lead	2 AC mains lead

For use with this unit only. Do not use it with other equipment. Also, do not use cords for other equipment with this unit.

Getting started

Using the remote control

Batteries	Use
Insert so the poles (i and j) match those in the remote control.	Remote control signal sensor
When closing the lid, insert it from the j (minus) side.





R6/LR6, AA

≥Use alkaline or manganese batteries. ≥Do not mix old and new batteries.

≥Do not use different types at the same time. ≥Do not heat or expose to flame.

≥Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.

≥Do not take apart or short circuit.

≥Do not attempt to recharge alkaline or manganese batteries. ≥Do not use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

Remove batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

20˚ 30˚ 20˚ 30˚

7 m directly in front of the unit

If you cannot operate the unit or other equipment using the remote control after changing the batteries, please re-enter the codes (> 12, 41).

RQT9407

5