Panasonic DMP-BD91, DMP-BD901, DMP-BD81 owner manual Network, Dst

¾CC Reset

Restore the default “Closed Caption” settings.

Network

∫Easy Network Setting (> 11)

∫Network Settings

Perform network-related settings individually. Press [OK] to show the following settings:

¾LAN Connection Mode

Select the LAN connection method.

¾Wireless Settings

This allows the wireless router and connection settings to be set up. Current connection settings and connection state can be checked. Press [OK] to show the following settings:

Connection Setting

The wireless router connection wizard will be displayed.

Double Speed Mode Setting (2.4GHz) Set the connection speed for a 2.4 GHz wireless format.

≥If you connect using the “Double Speed Mode (40MHz)”, 2 channels use the same frequency band, and there is consequently a greater risk of reception interference. This can cause the connection speed to drop or become unstable.

¾IP Address/DNS Settings

This is for checking the state of the network connection and setting the IP address and DNS-related.

Press [OK] to show the respective setting.

¾Proxy Server Settings

This is for checking the state of connection with the Proxy server and performing settings. Press [OK] to show the respective setting.

¾Network Service Settings (> 18) Press [OK] to show the following settings:

Time Zone

Set the unit’s time to match your location.

≥Some Network Service contents require the time zone to be set. Set time zone if necessary.

DST

Select “On” when using Daylight Saving time.

¾Network Drive Connection [BD901] [BD91] It is possible to access the shared folder of equipment not compatible with DLNA, such as the Windows XP operating system, and play back video, still pictures, and music on this unit. For the setting and operation method of connected equipment, refer to the following website. http://panasonic.jp/support/global/cs/ (This site is in English only.)

¾Remote Device Settings (> 18, 19)

Press [OK] to show the following settings:

Remote Device Operation

Enable to operate the unit by DMC, etc.

≥If “On” is selected, “Quick Start” will be activated.

Setting Unit Name

Set the name of this unit to be displayed on the connected equipment.

Registration Type [BD901] [BD91]

Auto	Allow connections to all the
	equipment accessing this unit.
	Set the permission for
Manual	individual equipment
	connections accessing this
	unit.

Remote Device List [BD901] [BD91] Registering/deregistering of the displayed equipment can be performed when “Manual” in “Registration Type” is selected.

¾BD-Live Internet Access (> 17)

You can restrict Internet access when BD-Live functions are used.

≥If “Allow ( Limited )” is selected, Internet access is permitted only for BD-Live contents which have content owner certificates.

24 SQT0108