Panasonic DMP-BDT105 operating instructions Network Easy Setting Connection Check, Display

Network Easy Setting (Connection Check)

Network Easy Setting (Connection Check)

Complete.
1.	LAN cable connection	: Fail
2.	IP address setting	: Fail
3.	Connection to gateway	: Fail
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. Select “No” and press [OK]
to finish Network Easy Setting.

	Yes	No
	OK
	Display		Check the
			following
1.	LAN cable connection or	: Fail	≥ Connection of
Connection to access point			the LAN
2.	IP address setting	: Fail	cables (> 11)
3.	Connection to gateway	: Fail
1.	LAN cable connection or	: Pass	≥ Connection
Connection to access point			and settings
2.	IP address setting	: Fail	of the hub and
			router
3.	Connection to gateway	: Fail
			≥ Settings of “IP
1.	LAN cable connection or	: Pass	Address/DNS
Connection to access point			Settings”
2.	IP address setting	: Pass	(> 31)
3.	Connection to gateway	: Fail

Network Easy Setting (Internet Connection Check)

Network Easy Setting (Internet Connection Check)

Complete.

- Connection to the Internet : Fail(Error code: B019)

Failed the connection test.

Cannot find the server.(Error code: B019)

Please refer to the operating instructions for the cause of the error and the solution for it.

Press [OK].

OK

Display	Check the following
Cannot find the server.	≥ “Primary DNS” and “Secondary
(Error code: B019)	DNS” settings of “IP Address/
	DNS Settings” (> 31)
	≥ The server may be busy or the
Failed to connect to	service may have been
	suspended. Please wait a few
the server.
	moments, and then try again.
(Error code: B020)
	≥ Settings of “Proxy Server
	Settings” (> 31) and the router

≥Refer to the operating instructions of the hub or router.

≥You can perform this setup anytime by selecting “Network Easy Setting” in the Setup menu. (> 31)

≥You can redo these settings individually using “Network Settings”. (> 31)

≥Do not use this device to connect to any wireless network for which you do not have usage rights.

During automatic searches in a wireless network environment, wireless networks (SSID*) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access.

≥After performing network settings on this unit, the settings (encryption level, etc.) of the Wireless router (Access point) might change. When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of Wireless router (Access point).

≥Please be aware that connecting to a network without encryption may result in the content of the communication being illegitimately viewed by a third party, or the leaking of data such as personal or secret information.

*An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.

14 VQT2U33