Control reference guide
When other Panasonic devices respond to the remote control of the unit, change the remote control code. (> 28)
| 10 |
1 | 11 |
| |
2 | 12 |
| |
| 13 |
3 | 14 |
| 15 |
4 | 16 |
| |
5 |
|
6 | 17 |
| 18 |
7 | 19 |
| |
| 20 |
8 | 21 |
9 |
|
1Turn the unit on and off
2TV operation buttons
You can operate the Panasonic TV using this unit’s remote control. Some buttons may not work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
[i j VOL] : Adjust the volume
3Select title numbers, etc./Enter numbers or characters
4Cancel
5Basic playback control buttons (> 17)
6Show Closed Caption setup screen (> 23, 26)
7Show
8Show Option menu (> 22)
9Colored buttons (red, green, yellow, blue) Used for various purposes depending on the display.
10Transmit the remote control signal
11Open or close the disc tray (> 14)
12Show the status messages (> 18)
13Switch Secondary Video on/off
14Change audio (> 17)
15Show MiracastTM screen (> 20)
16Show the Home Screen of Network Service (> 19)
17Exit the Menu screen
18Show Netflix screen (> 19)
19Show HOME menu (> 15)
20[3, 4, 2, 1] : Move the highlight for selection
[OK] : Confirm the selection
(;1) :
21Return to previous screen
8 9 10
|
|
|
|
| Pull to flip down |
|
| SD CARD |
|
| the front panel. |
1 | 2 | 3 4 | 5 | 6 | 7 |
1Disc tray (> 14)
2Remote control signal sensor Distance: Within approx. 7 m (23 feet) Angle: Approx. 20e up and down, 30e left and right
3[BDT460] [BDT361/360_for_U.S.A.] Blue LED
It is possible to set the LED to turn on/off. (> 28)
4SD card slot (> 14)
5[BDT460] V.OFF LED (Video off LED)
It is possible to set the LED to turn on/off. (> 28)
6USB port (> 14)
7Display
8Open or close the disc tray (> 14)
9Basic playback control switches (> 17)
10Standby/on switch (Í/I) (> 12)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit still consumes a small amount of power.
Rear panel terminals (>
8 SQT0080
