Panasonic DMR-E75V operating instructions Disc handling, Inserting discs

Before Use DVD

Disc handling

∫How to hold a disc

Do not touch the recorded surface.

∫If there is dirt or condensation on the disc

[RAM] [DVD-R]

≥Clean with an optional DVD-RAM/PD Disc cleaner (LF-K200DCA1, where available).

≥Do not use cleaners for CDs or cloths.

[DVD-A] [DVD-V] [VCD] [CD]

Wipe with a damp cloth and then wipe dry.

∫Handling precautions

≥Do not attach labels or stickers to discs. (This may cause disc warping and un-balanced rotation, rendering it unusable.)

≥Do not write on the label side with a ball-point pen or other writing instrument.

≥Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

≥Do not use scratch-proof protectors or covers. ≥Do not use the following discs:

-Disc with exposed adhesive from removed stickers or labels (rented discs etc.).

-Discs that are badly warped or cracked.

-Irregularly shaped discs, such as heart shapes.

≥Do not place in the following areas:

-In direct sunlight

-In very dusty or humid areas

-Near a heater

Inserting discs

[1]Press [<, OPEN/CLOSE] on the main unit to

open the tray.

You can insert a cartridge or non-cartridge disc.

Note

≥Load double-sided discs so the label for the side you want to record/play is facing up.

≥It is not possible to record continuously from one side of a double sided disc to the other. You will need to eject the disc and turn it over.

≥When using 8 cm DVD-RAM, remove the disc from the cartridge and insert it, making sure you align it with the groove.

Non-cartridge disc

(1)

(2)

(3) Cartridge disc

(1)Insert label-up.

(2)Insert inside the tray’s guides.

(3)Insert label-up with the arrow facing in.

[2]Press [<, OPEN/CLOSE] on the main unit to close the tray.

≥If you insert a DVD-RAM with the write-protect tab set to “PROTECT” (l 15), play starts automatically.

17