Panasonic DMR-EH65 operating instructions Connecting a television and VCR

STEP 1 Connection

Make sure to use the pair of supplied RF coaxial cables

Use the pair of supplied RF coaxial cables only when you make connections to the unit through its RF IN and RF OUT terminals. Striping may appear and disrupt images on the TV if you use different cables for connection.

≥Before connection, turn off all equipment and read the appropriate operating instructions.

≥Select the connection pattern that matches your environment from pattern A–B. Confirm connections not listed below with your dealer.

When the unit is not to be used for a long time

To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it is turned off

[approx. 2 W (Power Save mode)]

When “Power Save” is set to “On”, the “Quick Start” function does not work.

AConnecting a television

To the aerial				[For\Saudi\Arabia[	BE SURE TO
Aerial		Television’s rear panel
					READ THE
cable		AUDIO IN VIDEO IN			CAUTION FOR
	VHF/UHF	R	L		THE AC MAINS
	RF IN
		Red White Yellow			LEAD ON PAGE
					2 BEFORE
					CONNECTION.
1	2		3
RF coaxial		RF coaxial cable		Other connections
cable		(included)		(➡ 15, 16)
(included)
		Audio/Video cable
		(included)		Cooling fan

RF	RF		Red White Yellow
OUT	IN
		AV1 (TV)	OUT	AV OUT
Y	PB PR
			AV4	OPTICAL
			IN
COMPONENT VIDEO OUT		AV2 (DECODER/EXT)	R-AUDIO-L VIDEO S VIDEO	DIGITAL AUDIO OUT
				(PCM/BITSTREAM)

To household mains socket

[For]Australia]and]N.Z.]

(AC 220 to 240 V, 50 Hz)

[For]Asia]and]Middle]East]

(AC 220 to 240 V, 50/60 Hz)

AC mains lead (included)

Connect only after all other

4 connections are complete.

[For]Middle]East]

≥Use the AC mains lead that matches the socket for the area you live in.

AC IN

This unit’s rear panel

B

Connecting a television and VCR

		Television’s rear panel		[For\Saudi\Arabia[	BE SURE TO	To household mains socket
To the aerial						[For]Australia]and]N.Z.]
					READ THE
			AUDIO IN VIDEO IN			(AC 220 to 240 V, 50 Hz)
					CAUTION FOR
	VHF/UHF		R L			[For]Asia]and]Middle]East]
	RF IN				THE AC MAINS
			Red White Yellow			(AC 220 to 240 V, 50/60 Hz)
					LEAD ON PAGE
							AC mains lead
					2 BEFORE
					CONNECTION.		(included)
1		RF coaxial cable				6	Connect only after all other
							connections are complete.
		(included)	5
							[For]Middle]East]
Aerial				Other connections (➡ 15, 16)
	4	Audio/Video cable					≥Use the AC mains lead that
cable			(included)	Cooling fan			matches the socket for the area
							you live in.

RF		RF		Red White Yellow
OUT		IN
			AV1 (TV)	OUT	AV OUT
Y	PB	PR
				AV4	OPTICAL	AC IN
				IN
COMPONENT VIDEO OUT			AV2 (DECODER/EXT)	DEO	DIGITAL AUDIO OUT
				Red White Yellow	(PCM/BITSTREAM)	This unit’s rear panel
	2					Connect the unit directly to the television	Television
				Audio/Video cable		If you connect the unit through an AV
RF coaxial cable				3		selector or video cassette recorder to the
						television, video signal will be affected by
(included)						copyright protection systems and the picture	VCR
						may not be shown correctly.
							This unit

	Red White Yellow		≥When connecting to a television with a built-in VCR
		VCR’s rear	Connect to the input terminals on the television side if there
VHF/UHF RF OUT	R L		are both television and VCR input terminals.
RF IN	AUDIO OUT VIDEO OUT	panel

RQT8380

14

Connecting to a television with 21-pin Scart terminal

You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.

If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB output on this unit.

[Required]setting]

“AV1 Output” in the Setup menu (➡ 61)

Connecting to a VCR with 21-pin Scart terminal

You can also connect with the AV2 terminal on this unit using the 21-pin Scart cable.

[Required]setting]

“AV2 Input” in the Setup menu (➡ 61)