Panasonic DMR-EH65 operating instructions TV System

Restart set up

You can restart auto channel setting if set up (➡ 17) fails for some reason.

After performing steps 1–4 (➡ 62)

5 Press [3, 4] to select “Auto-Setup

Restart” and press [ENTER].

The confirmation screen appears.

6 Press [2, 1] to select “Yes” and press [ENTER].

[For]Australia]and]N.Z.]

≥If the country setting menu appears on the television Press [3, 4] to select the country and press [ENTER].

You can also use the following method to restart Auto-Setup. When the unit is on and stopped

Press and hold [X CH] and [CH W] on the main unit until the Country setting screen§ or the Auto-Setup screen appears.

All the settings except for the ratings level, ratings password and time settings return to the factory preset. The timer recording programmes are also cancelled.

§Only for Australia and N.Z.

To return to the previous screen

Press [RETURN].

To exit the screen

Press [RETURN] several times.

List of TV Reception Channels [For]Asia]

Tuner				Channel		VHF		UHF			CATV
System				Coverage
											S01–S05
PAL–BGH,				CCIR		E2–E12		E21–E69			M1–M10
SECAM–BG											U1–U10
											S21–S41
PAL–I				Hong		—		21–69			—
				Kong
PAL–DK,				OIRT		R1–R12		21–69			44 MHz to
SECAM–DKK1											470 MHz
PAL–D				China		1–12		13–57			Z1–Z35
[For]Australia]and]N.Z.]
Tuner		Channel			VHF		UHF				CATV
System	Coverage
PAL–B		Australia			0–12		28–69		45 MHz to
										470 MHz
PAL–BG				New	1–11		21–69		44 MHz to
			Zealand							470 MHz
[For]Middle]East]
Tuner				Channel		VHF		UHF			CATV
System				Coverage
											S01–S05
PAL–BGH,				CCIR	E2–E12			E21–E69			M1–M10
SECAM–BG											U1–U10
											S21–S41

TV System

Change the setting to match the equipment you are connecting with, or to match the title when there are both PAL and NTSC titles on the HDD.

1	While stopped	settings
2	Press [FUNCTIONS].
	Press [3, 4] to select “To Others”
	and press [ENTER].
3		unit’s
	Press [3, 4] to select “Setup” and
	press [ENTER].
4		the
	Press [3, 4] to select “Connection”
		Changing
5	and press [1].
	Press [3, 4] to select “TV System”
6	and press [ENTER].
	Press [3, 4] to select the TV system
	and press [ENTER].

Setup	TV System
	PAL
Tuning	NTSC
Disc
Picture
Sound
Display	SELECT
Connection	ENTER
Others	RETURN

≥PAL (factory preset)

–Select when connecting to a PAL or Multi-system television. Titles recorded using NTSC are played as PAL 60.

–Select to record television programmes and PAL input from other equipment.

–[HDD]Select when playing a PAL input title recorded on the HDD.

≥NTSC

–Select when connecting to a NTSC television. Television programmes cannot be recorded properly.

–Select to record NTSC input from other equipment.

–[HDD]Select when playing a NTSC input title recorded on the HDD.

7 Press [2, 1] to select “Yes” and press [ENTER].

To return to the previous screen

Press [RETURN].

To exit the screen

Press [RETURN] several times.

∫To change the setting all at once (PAL!#NTSC)

While stopped, keep pressing [∫] and [< OPEN/CLOSE] on the main unit for 5 or more seconds.

[Note]

≥This unit cannot record to discs containing both PAL and NTSC signals. (However, both types of programmes can be recorded onto the HDD.)

RQT8380

63