27
RQT6270
Reference
≥Some distortion is normal during SEARCH.
≥The screen may be disrupted briefly when you turn on and off the AUDIO ONLY feature. ;
≥Ensure that the equipment is connected properly. 6
≥Make sure the television is on.
≥Ensure the television’s video input setting (e.g., VIDEO 1) is correct.
≥If “This disc is PAL system. The output is sound only. ” is on the television, then you have loaded
a PAL system DVD-Audio and only the audio portion of the disc can be played.
≥Go to the Video menu in the ACTION screen, and change “TV Aspect” to suit your television. You
may also need to change the screen mode on the television itself. 7
≥Ensure that the unit is connected directly to the television, and is not connected through a video
cassette recorder.
≥Check the settings in the on-screen menu’s video menu. B

Picture

Displays

Picture distorted.
No picture.
The picture shown on the
television is not normal.
(The sides of the picture are cut
off or black bands appear at the
top and bottom of the screen.)
Picture quality is poor.
“NO PLAY” appears on the unit’s
display.
No on-screen display.
On-Screen Menu Icons not
displayed or only partially
displayed on the television.
The disc’s menu is displayed in a
different language.
No menu play.
“CHECK THE DISC” appears on
the unit’s display.
“ERROR” appears on the unit’s
display.
“H∑∑” appears on the unit’s
display.
∑∑ stands for a number.
“NO DISC” appears on the unit’s
display.
≥You inserted a disc the unit cannot play; insert one it can. 5
≥Go to Display in the ACTION menus, and select “On” for “On-Screen Messages”. C
≥Press [3, 4] while the rightmost icon is highlighted to move them down. @
≥Go to Disc in the ACTION menus, and select the preferred language for “Menus”. C
≥Menus are only displayed if they are recorded on the disc.
≥Disc is dirty. Wipe the disc clean. H
≥The track playing has been recorded with a nonstandard system.
≥Trouble is likely to have occurred. The number following “H” depends on the status of the unit.
Reset procedure:
Press [Í, POWER] to switch the unit to the standby mode and then back to ON. Alternatively,
press [Í, POWER] to switch the unit to the standby mode, disconnect the AC power supply cord,
and then reconnect it.
≥If the service numbers fail to clear, note the service number and contact a qualified service person.
≥You haven’t inserted a disc; insert one.
≥You haven’t inserted the disc correctly; insert it correctly. 9
Maintenance
To clean this unit, wipe with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, read the instructions that came with the cloth carefully.