Panasonic DVD-RV26, DVD-RV21 manual Channel balance Q, Frontl-.Center--.Frontr

Cc__ __

A,T,<I, Ib--

ENTER

I

i.....i

/

ACTION

Changing initial settings

Select either "2-channel" or "Multi-channel" to suit the speakers you

have connected. You can change the following settings when you select "Multi-channel".

] Speaker presence and size ((_)) I

1.Press [&,,,<l, I_] to select the item and press [ENTER].

2.Press [&,,] to select the setting and press [ENTER].

Icon examples: Surround speaker (L)

] Delay time (_)) I

[_ (Dolby Digital, center and surround speakers only)

For optimum listening with 5,1-channel sound, all the speakers, ex- cept for the subwoofer, should be the same distance from the seating position. If you have to place the center or surround speakers closer to the seating position, adjust the delay time to make up for the differ-

ence.

u_

i	Surroun(J	ii'SuiPwoofer
		® ®

NoLargeSmall

E]

If distance (_) (from the center speaker) and ® (from the surround speakers) are the same as or greater than ® (from the front speak-

ers), leave the delay time as "0", the factory preset.
If either	distance		® or O	is less than ®, find	the	difference	in the
relevant	table and change			to the recommended	setting.		1=
*Center	speaker						p,
		Difference			Setting
Approx.		50 cm (1V2feet)			1,3 ms
Approx.		100	cm (3 feet)		2.6	ms
Approx.		150	cm (5 feet)		3.9	ms
Approx.		200	cm (6 feet)		5.3	ms
eSurround		speakers
		Difference			Setting
Approx.		200	cm (6 feet)		5.3	ms
Approx. 400 cm (12 feet)					10.6 ms
Approx.		600 cm (18 feet)			15.9 ms

Changing the delay time

1.Press [&,_,<, I_] to select the delay time box and press

[ENTER].

2.Press [&,_] to adjust the delay time and press [ENTER].

[ Channel balance (Q) I

1.Press [A, If, <, I_] to select "Test" and press [ENTER].

A test signal is output from one speaker at a time, starting with the front left speaker and proceeding clockwise.

FRONT(L)-_.CENTER--_.FRONT(R)

SURROUND(L)<SURROUND(R)

2.While listening to the test signal, press [A, T] to adjust the volume of the center and surround speakers so they are the same apparent volume as the front speakers.

(The front speakers cannot be adjusted here.)

3, Press [ENTER].

(The test signals are stopped.)

No signal is output for the subwoofer. To adjust its volume, play something, then return to this screen to adjust to suit your taste.

When you are finished

Press [&, ,, _1, I_] to select "Exit" and press [ENTER].

ROTS733