Í
SETUP
SLEEP SETUP OPEN/CLOSE
| A.SRD |
|
|
|
| |
|
|
| 1 | 2 | 3 |
|
| AUDIO ONLY | 4 | 5 | 6 | Numbered | |
| DEPTH ENH | |||||
| 7 | 8 | 9 | buttons | ||
|
|
| ||||
| GROUP CANCEL | 0 |
|
| ||
CANCEL |
|
|
| S10 |
| |
| SKIP |
| SLOW/SEARCH |
| ||
| S | P | PAUSE |
| PLAY |
|
|
|
|
| |||
| TO |
|
|
|
| |
Entering a password (Ratings)
The password screen is shown when you select levels 0 to 7.
1.Input a
≥If you enter a wrong number, press [CANCEL] to erase it.
2.Press [ENTER].
≥The lock symbol appears closed to show the rating is locked.
≥Do not forget your password.
3.Press [ENTER] to confirm the 4 digits.
Now, when you insert a
Follow the
DIRECT NAVIGATOR
TOP
MENU
ENTER
DISPLAY
PLAY LIST
MENU
3, 4, 2, 1
ENTER
RETURN
RETURN
Digital output
[DVD-A] [DVD-V]
You can change the following setting from the Setup menu when you have connected equipment through this unit’s DIGITAL AUDIO OUT terminal (OPTICAL). Make sure “Digital Audio Output” is set to “On”.
PCM Down Conversion
Common procedures
See page 20 for menu and option details.
1 Press [SETUP] to show the menus.
SETUP | Disc |
| |
|
| Audio | English |
|
| Subtitle | Automatic |
|
| Menus | English |
SELECT | TAB |
|
|
|
| Ratings | Level 8 |
≥The QUICK SETUP screen appears when you press [SETUP] the first time after purchase (➜ page 9).
2 Press [2, 1] to select the menu’s tab.
The screen changes to display the menu.
Disc ,. Video ,. Audio ,. Display ,. Others
^ |
3 Press [3, 4] to select the item you want to change and press [ENTER].
4 Press [3, 4, 2, 1] to select the option and press [ENTER].
The screen now shows the menu again.
To return to the previous screen
Press [RETURN].
To exit the SETUP menu
Press [SETUP].
Select how to output audio with a sampling frequency of 96 kHz or | operations | ||
| |||
88.2 kHz. |
|
| |
≥Select “Yes” if the equipment you connect cannot process signals with a |
| ||
sampling frequency of 96 kHz or 88.2 kHz. |
| ||
No (Factory preset): Output as 96 kHz or 88.2 kHz | Advanced | ||
Yes: | Converted to 48 kHz or 44.1 kHz | ||
| |||
[Note]
≥Signals are converted to either 48 kHz or 44.1 kHz despite the above settings if the signals have a sampling frequency of over 96 kHz, or the disc has copy protection.
≥Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they can handle 96 kHz. Read your equipment’s operating instructions for details.
Dolby Digital and DTS Digital Surround
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM (Factory preset for DTS Digital Surround):
Select if the equipment you connected cannot decode the signal.
IMPORTANT
If the equipment you connected cannot decode the signal, the setting must be changed to PCM. If not, signals the equipment cannot process will be output by this unit, causing high levels of noise which can damage your hearing and the speakers.
RQT6974
21
