RQT7584
7
≥Select “Off” in “HDMI Audio Output” (➜page 17, “HDMI” tab).
Turn on the television and select the appropriate video input on the television.
To change these settings later
Select “QUICK SETUP” (➜ page 17, “Others” tab).
Manufacturer and Code No.
Test by turning on the television and changing channels. Repeat the procedure until you find the code that a llows correct operation.
≥If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote control is not comp atible
with your television.
Enjoying multi-channel surround sound
STEP 2

The remote control

∫Batteries ≥Insert so the poles (i and j) match those in the
remote control.
≥Do not use rechargeable type batteries.
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte
leakage which can damage items the fluid contacts
and may cause a fire.
Remove if the remote control is not going to be used
for a long period of time. Store in a cool, dark place.
∫Use
Aim at the remote control signal sensor (➜ page 8),
avoiding obstacles, at a maximum range of 7 m (23
feet) directly in front of the unit.
STEP 3

QUICK SETUP

123 4 5

Power ON.
Shows QUICK
SETUP
screen.
Follow the
message and
make the settings.
Press to finish
QUICK
SETUP.
Press to
exit.
OPTICAL
COAXIAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
CENTER
SUBWOOFER
5
.
COAXIAL IN
CENTER SUBWOOFER
SURROUND
(L) (R) FRONT
(L) (R)
COAXIAL IN
OPTICAL IN