Send/Receive Messages
TheSend/Receive function is used to both send messages created on the phone to
theserver of the Internet Service Provider, and to check your mailbox on the server
for incoming messages and download them to the phone at the same time.
1
FromIdle mode press
B32
to enter theE-mail menu
2
Use
e
until theSend/Receive function is highlighted and press
B
If there are unsent messages in theOutbox you will be prompted to send them.
3
Press
B
to send any unsent messages.
If there are new messages to download to the phone then you will be prompted to
receive them.
4
Press
B
to receive new messages.
If no action is taken the connection will time out after one minute and return to the
E-mailmenu.
Ifany messages are downloaded then, when finished, the phone will display the new
messages allowing them to be viewed, replied to etc.
Ifno messages are downloaded the phone will display the Inbox menu, unless there
are no messages in this list, then it will return to theE-mail menu.
Read Messages
FromIdle mode press
B32
and press
B
to enter theInbox menu
Theheader fields of the most recent messages will be displayed. Use
e
toscroll
through previous message headers and press
B
to read the current message.

Message Status

A message can be in one of four states. The current state of each message is
indicated by an appropriate icon:
No icon indicates a message which has been read or sent.
$
Indicates an unread or unsent message
%
Indicates that the message has been locked
&
Indicatesa broken message (either a message too long for the phone or a
message which contains an attachment)
Whilereading a message any of the following operations may be performed by using
the
f
keyuntil the relevant operation is displayed in the option area and pressing
B
:

Reply

Compose a reply to the sender of the current message
36
Internet E-mail