Manuals / Panasonic / Lawn and Garden / Patio Furniture

Panasonic EP-MS40 Selecting A Menu And Starting The Massage, Upper body massage, Pre-Programs

Models: EP-MS40

1 33

Download 33 pages 58.32 Kb

Page 15

SELECTING A MENU AND STARTING THE MASSAGE

SELECTING A MENU AND STARTING THE MASSAGE

•After 15 minutes of use, we recommend that you take a 10 minute break.

•Use the unit up to twice per day, for a total of 30 minutes.

See Caution No. 5 and 9 on page 2.

English

Haveyou removed the backrest cushion?

(See page 10.)

Is the leg/foot massage

1 section ejected?

(See page 12.)

2

*The above display appears even when the backrest cushion has been removed and the leg/foot massage section is ejected.

1 Press the button to turn on the power.

The menu selection buttons flash.

(The power will turn off automatically if you do not select a menu or start a leg/ foot massage within 3 minutes after turning on the power.)

2 Upper body massage

Select a menu from among Pre-Programs, Self Program and Manual operation.

Pre-Programs

See page 15.

You can select from among 4 programs for automatically loosening from neck to lower back.

Self Program

See page 18.

You can select “neck and shoulders” or “back and lower back”. You can also select the massage time (15 minutes or less).

Manual operation

See page 21.

You can concentrate the massage on desired areas.

Leg/foot massage

Press the

button.

See page 23.

Leg/foot massage can be used by itself or simultaneously with the upper body massage.

14

Image 15

Panasonic EP-MS40 Selecting A Menu And Starting The Massage, Press the button to turn on the power, Upper body massage

Contents

Sillón de Masaje Doméstico Fauteuil vibromasseur Operating InstructionsHousehold Massage Lounger Instrucciones de Uso Mode d’emploiSAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONSCAUTION To avoid the risk of injury SAFETY PRECAUTIONSCAUTION To avoid damaging the chair, follow these precautions OPERATING PRECAUTIONSDimensions H × W × D SPECIFICATIONSGROUNDING INSTRUCTIONS Power SupplyBack PART NAMES AND FUNCTIONSMain unit FrontDisplay ControllerAccessories SETTING UP THE UNITWhere to use the unit 1 Unpack the unit Inspect contents of shipping container2 How to move the unit Using the wheels to move the unitLifting the Unit 3 Attach the controller holder, and insert the controller 5 Connect the power cord to the unit2 Insertinlet. the connector into the appliance 3 Be sure to push the connector in all the wayBEFORE EVERY MASSAGE CHECK THE UNIT 1 Remove the backrest cushion2 Make sure there are no tears or rips in the fabric plug 5 Check the power cord and the powerHow to take out and store away the leg/ foot massage section 4 Make sure there is no foreign matter between the unitand put your feet on it 7 Switch on the power supply8 Sit down in a massage position 9 Take out the leg/foot massage sectionfully extending it and with the calf section in a If you cannot reach the leg/foot massage section to push it forwardSlide your body forward Use the leg/foot message section withoutPre-Programs 1 Press the button to turn on the powerSELECTING A MENU AND STARTING THE MASSAGE 2 Upper body massageUSING PRE-PROGRAMS Pre-Programs characteristics1 Press or to select a program Press the button Press the - + adjustment buttonsTo adjust program intensity To CustomizeDisplay during program To change the content of the massagePress the button, and select a different program Press the button and select a program1 Press or to select a program USING SELF PROGRAM4 Press the button to complete the setting 2 Select a program and press the button. 3 Set duration of massageWhen you have selected “Back and lower back” When you have selected “Neck and shoulders”To change the content of the massage To select a different program from Self ProgramTo change to Pre-Programs Press the - + adjustment buttonsDownward knead and tap USING MANUAL OPERATIONPress the buttonTo change the content of the massage To adjust the positionbutton during an operation to continue the same operation only Press the - + adjustment buttonsOperations of leg/foot massage USING LEG/FOOT MASSAGE FOR CALVES AND SOLESTo adjust the intensity of the leg/foot massage Leg/foot massage duration1 Slide the power switch to the “off” position Timer functionIf you experience any problems Press the button 2 Put the backrest cushion in place. Disconnecting the powerCLEANING AND MAINTENANCE Seat FabricPlastic Area To hand wash avoid machine washing How to washTo dry clean You can remove the backrest cushion cover and back pad for washingBack pad RemovingFITTING AND REMOVING THE BACKREST CUSHION COVER AND BACK PAD Backrest cushion coverFitting Backrest cushion cover USING AS A LOUNGER1 Put the backrest cushion in place 2 The leg/foot massage section should be stored awayQUICK 8 min GENERAL CONTENT OF MASSAGE PROGRAMSContents of Pre-Programs DEEPThere is nothing wrong with the unit TROUBLESHOOTINGError display