2 How to move the unit
Since the unit is very heavy [approximately 103.4 lbs (47 kg)], be careful to avoid back injuries. (The unit must be carried by two people.)
Put the unit down slowly and carefully watch your step. 
See Caution No. 13 on page 3.
Lifting the Unit
•You may damage the floor by dropping the unit if you do not hold it correctly.
•Check that the leg/foot massage section is stored away and locked.
Place the controller and power cord on the seat | In narrow corridors etc., hold the front and rear of the |
| main unit. |
| Place the controller and power cord |
| on the seat |
|
| Placement area (place a mat | |
|
|
| to protect the floor) |
Hold the sides of the | Placement area (place a mat |
|
|
main unit | to protect the floor) | At the front | Hook your fingers on the |
|
| ||
|
| Hold the stiff metal part | dent under the main unit |
|
|
| |
|
| within the main unit |
|
English
Using the wheels to move the unit
Place the controller and power cord on the seat
|
| Wheels |
Mat | Lift it no higher | The hold position is the same |
than waist height | as that shown in “At the front”. |
