15
8Attaching the pillow
1. Attach the pillow to the velcro fasteners.
See page 38 for a guide to the position of the pillow
Pillow
Velcro
fasteners
•
2. Fasten the control panel cord using the clip.
Clip
Control panel cord
Fasten the cord so that the
portion under the clip is
not slack.
Lift the control panel to remove.
1. Insert the plate into the pocket on the outer shoulder
massage unit.
Grasp the pocket and pull it slightly to expand the
opening, so that the plate can be inserted easily.
Shoulder plate
Pocket
•
(For the right
shoulder)
(For the left
shoulder)
2. Slide the inserted plate for the outer shoulder to the
inside (recommended position).
The up/down and in/out positions of the plate can be
adjusted.
The recommended position is when the plate is
inserted into the deepest position and then moved to
the most inside position.
Grasp the pocket opening with one hand, hold the plate
with the other hand, and move it into the deepest
position.
•
•
7Inserting the shoulder plate
Proper plate for each outer shoulder
EP30006US.indb 15 2007/06/11 21:10:19